EASTMAN HIFOR HIFOR POLYMER LT24017-F,
NATURAL HIGH-STRENGTH LINEAR POLYETHYLENE
Preliminary Data Sheet
| Propertya |
Testb Method |
Value, Unitsc |
 |
||
|
||
| Resin Properties | ||
|
||
| Melt Index (Condition 190°C/2.16kg) | D 1238 | 2.3 g/10 min |
|
||
| Density | D 4883 | 917 kg/m3 (0.917 g/cm3) |
|
||
|
||
| Film Properties | ||
|
||
| Thickness of Film Tested | 1.0 mils | |
|
||
| Haze | D 1003 | 2% |
|
||
| Gloss @ 45° | D 2457 | 90 |
|
||
| Dart Impact | D 1709A | 100 g |
|
||
| Elmendorf Tear Resistance | ||
| M.D. | D 1922 | 400 gf |
| T.D. | D 1922 | 600 gf |
|
||
| Tensile Strength @ Break | ||
| M.D. | D 882 | 38 MPa (5500 psi) |
| T.D. | D 882 | 34 MPa (5000 psi) |
|
||
| Tensile Strength @ Yield | ||
| M.D. | D 882 | 9 MPa (1300 psi) |
| T.D. | D 882 | 9 MPa (1300 psi) |
|
||
| Elongation @ Break | ||
| M.D. | D 882 | 750% |
| T.D. | D 882 | 850% |
|
||
| Tensile Modulus, 1% Secant | ||
| M.D. | D 882 | 200 MPa (29000 psi) |
| T.D. | D 882 | 220 MPa (32000 psi) |
|
||
|
||
|
a Unless noted otherwise, all tests are run at 23oC (73oF) and 50% relative humidity. b Unless noted otherwise, the test method is ASTM. c Units are in SI or US customary units. |
||
|
|||
|
Features |
|||
| 1-mil BLOWN Film Properties at 2.4 blow-up ratio and 4.7 lb/hr/inch die output are: Haze 6%, Gloss 70, Dart Impact 300g, Elmendorf Tear MD/TD 450/500g, Tensile @ Break MD/TD 6100/5400 psi, Tensile @ Yield MD/TD 1100/1100 psi, Elongation @ Break MD/TD 700/800%, 1% Secant Modulus MD/TD 29000/32000 psi. | |||
|
|
|||
|
Conditions |
|||
| CAST Film Preparation and Conditions: Extrusion conditions used to produce cast film include a line speed of 750 fpm. Density results are on Base Resin. Blown Film Preparation & Conditions: Extrusion conditions used to produce 1 mil (0.025 mm) film include a 2.4:1 blow-up ratio and 4.7 lb/hr/inch die output. Density results are on Base Resin. | |||
|
|
|||
|
Comments |
|||
| Properties reported here are typical of average lots. Eastman makes no representation that the material in any particular shipment will conform exactly to the values given. | |||
|
|
|||
|
Applications |
|||
| EASTMAN HIFOR Polymer LT24017-F is a high strength polyethylene containing no slip and no antiblock. It is designed for high performance cast film applications and is especially well suited for the core layer of cast stretch film. It exhibits good clarity, good stretchability, and very good puncture resistance. | |||
|
|
|||
|
||
 |
||
|
Neither Eastman Chemical Company nor its marketing affiliates shall be
responsible for the use of this information, or of any product, method,
or apparatus mentioned, and you must make your own determination of its
suitability and completeness for your own use, for the protection of the
environment, and for the health and safety of your employees and purchasers
of your products. No warranty is made of the merchantability of fitness
of any product, and nothing herein waives any of the Seller's conditions of sale. |
||
| 4/3/00 5:30:40 PM | ||