EASTMAN HIFOR Polymer LT24005-F
Preliminary Data Sheet
| Propertya |
Testb Method |
Value, Unitsc |
 |
||
|
||
| Resin Properties | ||
|
||
| Melt Index (Condition 190°C/2.16kg) | D 1238 | 0.85 g/10 min |
|
||
| Density | D 4883 | 917 kg/m3 (0.917 g/cm3) |
|
||
|
||
| Film Properties | ||
|
||
| Thickness of Film Tested | 1.0 mils | |
|
||
| Haze | D 1003 | 16% |
|
||
| Gloss @ 45° | D 2457 | 50 |
|
||
| Dart Impact | D 1709A | 400 g |
|
||
| Seal Initiation Temperature | Eastman | 99°C (210°F) |
|
||
| Elmendorf Tear Resistance | ||
| M.D. | D 1922 | 500 gf |
| T.D. | D 1922 | 600 gf |
|
||
| Tensile Strength @ Break | ||
| M.D. | D 882 | 59 MPa (8500 psi) |
| T.D. | D 882 | 45 MPa (6500 psi) |
|
||
| Tensile Strength @ Yield | ||
| M.D. | D 882 | 12 MPa (1700 psi) |
| T.D. | D 882 | 10 MPa (1500 psi) |
|
||
| Elongation @ Break | ||
| M.D. | D 882 | 700% |
| T.D. | D 882 | 850% |
|
||
| Tensile Modulus, 1% Secant | ||
| M.D. | D 882 | 186 MPa (27000 psi) |
| T.D. | D 882 | 207 MPa (30000 psi) |
|
||
|
||
|
a Unless noted otherwise, all tests are run at 23oC (73oF) and 50% relative humidity. b Unless noted otherwise, the test method is ASTM. c Units are in SI or US customary units. |
||
|
|||
|
Conditions |
|||
| Extrusion conditions used to produce film include a 2.4:1 blow-up ratio and 4.7 lb/hr/inch die output. Density results are on Base Resin. | |||
|
|
|||
|
Comments |
|||
| Properties reported here are typical of average lots. Eastman makes no representation that the material in any particular shipment will conform exactly to the values given. | |||
|
|
|||
|
Applications |
|||
| EASTMAN HIFOR Polymer LT24005-F is a high strength linear polyethylene containing medium slip and medium antiblock. It is designed for blown film applications and is well suited for consumer and industrial packaging markets which require good impact and tear strength. Films produced using LT24005-F exhibit low imperfections and facilitate production at thinner gauges. | |||
|
|
|||
|
||
 |
||
|
Neither Eastman Chemical Company nor its marketing affiliates shall be
responsible for the use of this information, or of any product, method,
or apparatus mentioned, and you must make your own determination of its
suitability and completeness for your own use, for the protection of the
environment, and for the health and safety of your employees and purchasers
of your products. No warranty is made of the merchantability of fitness
of any product, and nothing herein waives any of the Seller's conditions of sale. |
||
| 3/29/00 7:30:21 AM | ||