MXSTEN Extra Low Density Polyethylene CM27058-F, Natural
Preliminary Data Sheet
| Propertya |
Testb Method |
Value, Unitsc |
 |
||
|
||
| Resin Properties | ||
|
||
| Melt Index (Condition 190°C/2.16kg) | D 1238 | 3.2 g/10 min |
|
||
| Density | D 4883 | 914 kg/m3 (0.914 g/cm3) |
|
||
|
||
| Film Properties | ||
|
||
| Thickness of Film Tested | 1.0 mils | |
|
||
| Haze | D 1003 | 2% |
|
||
| Gloss @ 45° | D 2457 | 80 |
|
||
| Dart Impact | D 1709A | 200 g |
|
||
| Seal Initiation Temperature | Eastman | 110°C (230°F) |
|
||
| Elmendorf Tear Resistance | ||
| M.D. | D 1922 | 400 gf |
| T.D. | D 1922 | 650 gf |
|
||
| Tensile Strength @ Break | ||
| M.D. | D 882 | 31 MPa (4500 psi) |
| T.D. | D 882 | 24 MPa (3500 psi) |
|
||
| Tensile Strength @ Yield | ||
| M.D. | D 882 | 10 MPa (1400 psi) |
| T.D. | D 882 | 10 MPa (1400 psi) |
|
||
| Elongation @ Break | ||
| M.D. | D 882 | 700% |
| T.D. | D 882 | 800% |
|
||
| Tensile Modulus, 1% Secant | ||
| M.D. | D 882 | 165 MPa (24000 psi) |
| T.D. | D 882 | 193 MPa (28000 psi) |
|
||
|
||
|
a Unless noted otherwise, all tests are run at 23oC (73oF) and 50% relative humidity. b Unless noted otherwise, the test method is ASTM. c Units are in SI or US customary units. |
||
|
|||
|
Conditions |
|||
| Extrusion conditions used to produce 1 mil (0.025 mm) film include a 2.4:1 blow-up ratio and 4.7 lb/hr/inch die output. Density results are on Base Resin. | |||
|
|
|||
|
Comments |
|||
| Properties reported here are based on limited testing. Eastman makes no representation that the material in any particular shipment will conform exactly to the values given. | |||
|
|
|||
|
Applications |
|||
| MXSTEN CM27058-F is an extra low density polyethylene containing no slip and no antiblock. It is designed for high performance applications where excellent processability, very low stiffness and exceptional lot-to-lot consistency are needed. Applications for CM27058-F include cast films for a multitude of needs. | |||
|
|
|||
|
||
 |
||
|
Neither Eastman Chemical Company nor its marketing affiliates shall be
responsible for the use of this information, or of any product, method,
or apparatus mentioned, and you must make your own determination of its
suitability and completeness for your own use, for the protection of the
environment, and for the health and safety of your employees and purchasers
of your products. No warranty is made of the merchantability of fitness
of any product, and nothing herein waives any of the Seller's conditions of sale. |
||
| 3/29/00 2:52:41 PM | ||