
| VORIDIAN PET
CB12 Product Data Sheet | ||||
| Propertya | Testb Method |
Typical Value, Unitsc | ||
| Intrinsic Viscosity | EMN-A-AC-G-V-1 | 0.84 | ||
| Crystalline Density | D 1505 | 1.4 | ||
| Melt Density @ 285°C (545°F) | D 1238 (Note A- Table 2) | 1.2 | ||
| Acetaldehyde | TEPO-A-AN-G-GC-67 | <3 ppm | ||
| d | D 3418 | 245°C (473°F) | ||
| Heat of Fusione | E 793 | 59 kJ/kg (14 cal/g) | ||
| Specific Heatf | ||||
|
DSC | 1.2 kJ/kg·K (0.24 Btu/lb·°F) | ||
|
DSC | 1.4 kJ/kg·K (0.29 Btu/lb·°F) | ||
|
DSC | 1.5 kJ/kg·K (0.33 Btu/lb·°F) | ||
|
DSC | 1.9 kJ/kg·K (0.41 Btu/lb·°F) | ||
|
DSC | 2.1 kJ/kg·K (0.45 Btu/lb·°F) | ||
| Fines wt %, maximum | CEPC-A-AN-G-PTM-10 | 0.05 | ||
| U.S.-Produced Only | ||||
| Bulk Density | ||||
|
D 1895 | 845 (53 ) | ||
|
D 1895 | 898 (56 ) | ||
| Pellet Weight | 2.0 g/100 pellets | |||
| Mexico-Produced Only | ||||
| Bulk Density | ||||
|
D 1895 | 810 (51 ) | ||
|
D 1895 | 880 (55 ) | ||
| aUnless noted otherwise, all tests are run at
23oC (73oF) and 50% relative
humidity. bUnless noted otherwise, the test method is ASTM. cUnits are in SI or US customary units. dDetermined by DSC on the second heating cycle. eDetermined by DSC on the first heating cycle. fDetermined by DSC on the first heating cycle. Specific heat in cal/g°C is numerically equivalent to the value in Btu/lb°F. | ||||
| General VORIDIAN polymers are condensation polymers produced by a continuous melt-phase polymerization process followed by a solid-state polymerization process. Comments Properties reported here are typical of average lots. Voridian makes no representation that the material in any particular shipment will conform exactly to the values given. Voridian is a trademark of Eastman Chemical Company. Voridian Company is a division of Eastman Chemical Company.
| ||||
Neither Voridian nor its marketing affiliates shall be responsible for the use of this information, or of any product, method, or apparatus mentioned, and you must make your own determination of its suitability and completeness for your own use, for the protection of the environment, and for the health and safety of your employees and purchasers of your products. No warranty is made of the merchantability of fitness of any product, and nothing herein waives any of the Seller's conditions of sale. | ||||
| 05-Apr-2002 1:24:56 PM | ||||