VORIDIAN PET
9921W
Product Data Sheet
|
 |
| Propertya |
Testb
Method |
Typical Value,
Unitsc |
 |
|
| Pellet
Properties |
|
| Intrinsic
Viscosity |
EMN-A-AC-G-V-1 |
0.80
|
|
| Crystalline
Density |
D 1505
|
1.4
|
|
| Bulk Density |
|
|
D 1895
|
817
(51
) |
|
|
D 1895
|
881
(55
) |
|
| Melt
Density @ 285°C (545°F) |
D 1238 (Note A- Table
2) |
1.2
|
|
| Acetaldehyde |
TEPO-A-AN-G-GC-67 |
<1 ppm
|
|
|
d |
D 3418
|
245°C (473°F) |
|
| Heat of
Fusione |
E 793 |
56 kJ/kg
(13 cal/g) |
|
| Specific Heatf |
|
|
DSC |
1.1 kJ/kg·K (0.26 Btu/lb·°F) |
|
|
DSC |
1.3 kJ/kg·K (0.31 Btu/lb·°F) |
|
|
DSC |
1.4 kJ/kg·K (0.33 Btu/lb·°F) |
|
|
DSC |
1.9 kJ/kg·K (0.45 Btu/lb·°F) |
|
|
DSC |
2.1 kJ/kg·K (0.50 Btu/lb·°F) |
|
| Fines wt %, maximum |
TEPO-A-AN-G-GA-4 |
0.1
|
|
| Pellet
Size |
|
2.5 mm
(0.1 in.) |
|
| Pellet
Shape |
|
Cubical
|
|
|
| Film
Properties |
|
| Thickness of Film
Tested |
D 374 |
250 microns (10 mils)
|
|
| Intrinsic
Viscosity (film) |
EMN-A-AC-G-V-1 |
0.75
|
|
| Density |
D 1505
|
1.33
|
|
| Haze |
D 1003
|
0.8% |
|
| Gloss @ 45° |
D 2457
|
108
|
|
| Transparency |
D 1746
|
85% |
|
| Regular
Transmittance |
D 1003
|
89% |
|
| Total
Transmittance |
D 1003
|
91% |
|
| Water Vapor
Transmission Rateg |
F 372 |
6
(0.4
) |
|
|
|
D 1434
|
28
(70
) |
|
|
|
D 3985
|
5.1
(13
) |
|
| Elmendorf Tear Resistance |
|
|
D 1922
|
9.8 N
(1000 gf) |
|
|
D 1922
|
12.7 N
(1300 gf) |
|
| PPT Tear Resistance |
|
|
D 2582
|
102 N
(23 lbf) |
|
|
D 2582
|
120 N
(27 lbf) |
|
| Tear Propagation Resistance, Split Tear Method
|
| |
@ 254 mm/min (10 in./min) M.D. | |
D 1938
|
15 N (3.3 lbf)
58 N/mm
(330 lbf/in.) |
| |
@ 254 mm/min (10 in./min) T.D. | |
D 1938
|
16 N (3.6 lbf)
63 N/mm
(360 lbf/in.) |
|
| Tear Resistance, Trouser @ 200 mm/min |
|
|
ISO
6383-1 |
54 N/mm
|
|
|
ISO
6383-1 |
59 N/mm
|
|
| Tensile Strength @ Yield |
|
|
D 882 |
59 MPa
(8500 psi) |
|
|
D 882 |
57 MPa
(8300 psi) |
|
| Tensile Strength @ Break |
|
|
D 882 |
58 MPa
(8400 psi) |
|
|
D 882 |
39 MPa
(5600 psi) |
|
| Elongation @ Yield |
|
|
D 882 |
4% |
|
|
D 882 |
4% |
|
| Elongation @ Break |
|
|
D 882 |
300% |
|
|
D 882 |
200% |
|
| Tensile Modulus |
|
|
D 882 |
2200 MPa
(3.2
) |
|
|
D 882 |
2200 MPa
(3.2
) |
|
| Dart Impacth |
|
|
D 1709A
Modified |
500 g
|
|
|
D 1709A
Modified |
400 g
|
|
|
| Injection Molded
Properties (ASTM Method) |
|
| Specific
Gravity |
D 1505
|
1.34
|
|
| Tensile Stress @
Break |
D 638 |
25 MPa
(3600 psi) |
|
| Tensile Stress @
Yield |
D 638 |
60 MPa
(8700 psi) |
|
| Elongation @
Break |
D 638 |
110% |
|
| Tensile
Modulus |
D 638 |
2500 MPa
(3.6
) |
|
| Flexural
Modulus |
D 790 |
2600 MPa
(3.7
) |
|
| Flexural Yield
Strength |
D 790 |
85 MPa
(12300 psi) |
|
| Deflection Temperature |
|
|
D 648 |
69°C (156°F) |
|
|
D 648 |
67°C (153°F) |
|
| Rockwell Hardness, R
Scale |
D 785 |
112
|
|
| Izod Impact Strength, Notched |
|
|
D 256 |
36 J/m
(0.68 ft·lbf/in.) |
|
|
D 256 |
27 J/m
(0.51 ft·lbf/in.) |
|
| Impact Strength, Unnotchedi |
|
|
D 4812
|
NB |
|
|
D 4812
|
NB |
|
|
D 4812
|
NB |
|
|
D 4812
|
NB |
|
| Impact Resistance (Puncture), Energy @ Max. Load
|
| |
2.5-mm (0.100-in.) Thick Plaques, @ 23°C (73°F)
| |
D 3763
|
26 J (19 ft·lbf) |
| |
2.5-mm (0.100-in.) Thick Plaques, @ -40°C (-40°F)
| |
D 3763
|
1.6 J
(1.2 ft·lbf) |
| |
3.2-mm (0.125-in.) Thick Plaques @ 23°C (73°F)
| |
D 3763
|
31 J (23 ft·lbf) |
| |
3.2-mm (0.125-in.) Thick Plaques @ -40°C (-40°F)
| |
D 3763
|
2.1 J
(1.6 ft·lbf) |
|
|
| Injection Molded
Properties (ISO Method) |
|
| Density |
ISO 1183, Method
D |
1.34
|
|
| Tensile Stress @
Break |
ISO 527
|
25 MPa
|
|
| Tensile Stress @
Yield |
ISO 527
|
58 MPa
|
|
| Elongation @
Break |
ISO 527
|
110% |
|
| Tensile
Modulus |
ISO 527
|
2500 MPa
|
|
| Flexural
Modulus |
ISO 178
|
2400 MPa
|
|
| Flexural Yield
Strength |
ISO 178
|
80 MPa
|
|
| Deflection Temperature |
|
|
ISO 75
|
69°C |
|
|
ISO 75
|
67°C |
|
| Rockwell Hardness, R
Scale |
ISO
2039-2 |
114
|
|
| Izod Impact Strength, Notched, Type 1 Specimen, Type A
Notch |
|
|
ISO 180
|
4.5
|
|
|
ISO 180
|
3.1
|
|
| Impact Strength, Unnotched, Type 1 Specimenj
|
|
|
ISO 180
|
NB
|
|
|
ISO 180
|
195 (32%C/68%NB)
|
|
|
ISO 180
|
180
|
|
|
ISO 180
|
160
|
|
| Impact Resistance (Puncture), Energy @ Max. Loadk
|
| |
2.5-mm Thick Plaques @ 23°C | |
ISO
6603-2 |
15 J
|
| |
2.5-mm Thick Plaques @ -40°C | |
ISO
6603-2 |
0.8 J
|
| |
3.2-mm Thick Plaques @ 23°C | |
ISO
6603-2 |
18 J
|
| |
3.2-mm Thick Plaques @ -40°C | |
ISO
6603-2 |
1.0 J
|
|
|
aUnless noted otherwise, all tests are run at
23oC (73oF) and 50% relative
humidity.
bUnless noted otherwise, the test method is
ASTM.
cUnits are in SI or US customary
units.
dDetermined by DSC on the second heating
cycle.
eDetermined by DSC on the first heating
cycle.
fDetermined by DSC on the first heating
cycle.
gTest conducted at 38°C (100°F) and 100%
relative humidity.
h12.7 mm (0.5 in.) dia. head, 127
mm (5 in.) dia. clamp, 660 mm (26 in.) drop
iNonbreak
as defined by ASTM D 4812 with 3.2-mm
specimens.
jNonbreak as defined by ISO 180 with 4-mm
specimens.
kTesting based on ISO 6603-2 using a
striker diameter of 10 mm, a support and clamp diameter of 40 mm, and a
velocity of 4.1 m/s.
|
General
VORIDIAN PET thermoplastic polyesters are
condensation polymers produced by a continuous melt-phase polymerization
process followed by a solid-state polymerization
process.
Comments
Properties reported here are typical of
average lots. Voridian makes no representation that the material in any
particular shipment will conform exactly to the values given.
Voridian is a trademark of Eastman Chemical Company.
Voridian Company is a division of Eastman Chemical Company.
|
Neither Voridian
nor its marketing affiliates shall be responsible for the use of this
information, or of any product, method, or apparatus mentioned, and you
must make your own determination of its suitability and completeness for
your own use, for the protection of the environment, and for the health
and safety of your employees and purchasers of your products. No warranty
is made of the merchantability of fitness of any product, and nothing
herein waives any of the Seller's conditions of
sale.
|
| 18-Mar-2002 9:13:34
AM |
